Working With Odbc Logs; Preparing For Odbc Logging - Cisco 2509 - Router - EN User Manual

Chapter 9 Working with Logging and Reports

Working with ODBC Logs

Preparing for ODBC Logging

Step 1
Step 2
Step 3
78-14696-01, Version 3.1
This section contains procedures for the following topics:
• Preparing for ODBC Logging, page 9-19
Configuring a System Data Source Name for ODBC Logging, page 9-20
•
• Configuring a CSV Log, page 9-16
To prepare for ODBC logging, there are several steps you must complete. After
you have prepared for ODBC logging, you can configure individual ODBC logs.
To prepare for ODBC logging, follow these steps:
Set up the relational database to which you want to export logging data. For more
information, refer to your relational database documentation.
Set up a system data source name (DSN) on the Cisco Secure ACS server. For
instructions, see Configuring a System Data Source Name for ODBC Logging,
page 9-20.
Enable ODBC logging in the Cisco Secure ACS HTML interface:
In the navigation bar, click Interface Configuration.
a.
Click Advanced Options.
b.
c. Select the ODBC Logging check box.
Click Submit.
d.
Result: Cisco Secure ACS enables the ODBC logging feature. On the
Logging page, in the System Configuration section, Cisco Secure ACS
displays links for configuring ODBC logs.
Result: You can now configure individual ODBC logs. For instructions, see
Configuring an ODBC Log, page 9-20.
User Guide for Cisco Secure ACS for Windows Server
Working with ODBC Logs
9-19