Cisco 2509 - Router - EN User Manual page 299

Chapter 8 Establishing Cisco Secure ACS System Configuration
Click CiscoSecure Database Replication.
Step 3
Note
Result: The Database Replication Setup page appears.
For each CiscoSecure database component you want to replicate to a secondary
Step 4
Cisco Secure ACS, under Replication Components, select the corresponding
Send check box.
Step 5 For each secondary Cisco Secure ACS that you want the primary
Cisco Secure ACS server to replicate its select components to, select the
secondary Cisco Secure ACS server from the AAA Servers list, and then click -->
(right arrow button).
Tip
Note
Step 6 At the bottom of the browser window, click Replicate Now.
Result: Cisco Secure ACS saves the replication configuration. Cisco Secure ACS
immediately begins sending replicated database components to the secondary
Cisco Secure ACSes you specified.
78-14696-01, Version 3.1
If this feature does not appear, click Interface Configuration, click
Advanced Options, and select the CiscoSecure ACS Database
Replication check box. Also, verify that the Distributed System Settings
check box is selected; if not, select the Distributed System Settings
check box.
If you want to remove a secondary Cisco Secure ACSes from the
Replication list, select the secondary Cisco Secure ACS in the
Replication list, and then click <-- (left arrow button).
Cisco Secure ACS does not support bidirectional database replication. A
secondary Cisco Secure ACS receiving replicated components verifies
that the primary Cisco Secure ACS is not on its Replication list. If not, the
secondary Cisco Secure ACS accepts the replicated components. If so, it
rejects the components.
User Guide for Cisco Secure ACS for Windows Server
CiscoSecure Database Replication
8-25