Ip Pools Server - Cisco 2509 - Router - EN User Manual

Chapter 8 Establishing Cisco Secure ACS System Configuration
Step 4
Step 5
Step 6

IP Pools Server

78-14696-01, Version 3.1
To have Cisco Secure ACS send an e-mail when an event occurs, follow these
steps:
Select the Email notification of event check box.
a.
In the To box, type the e-mail address (up to 200 characters) to which
b.
Cisco Secure ACS should send event notification e-mail.
Do not use underscores in the e-mail addresses you type in this box.
Note
In the SMTP Mail Server box, type the hostname (up to 200 characters) of the
c.
sending e-mail server.
The SMTP mail server must be operational and must be available
Note
from the Cisco Secure ACS.
If you want to set up system monitoring, see
page 8-57.
If you are done setting up Cisco Secure ACS Service Management, click Submit.
Result: Cisco Secure ACS implements the service management settings you
made.
This section provides information about the IP Pools feature, including
procedures for creating and maintaining IP pools. This section contains the
following topics:
About IP Pools Server, page 8-60
•
Allowing Overlapping IP Pools or Forcing Unique Pool Address Ranges,
•
page 8-61
Refreshing the AAA Server IP Pools Table, page 8-62
•
• Adding a New IP Pool, page 8-63
Editing an IP Pool Definition, page 8-64
•
Setting Up System Monitoring,
User Guide for Cisco Secure ACS for Windows Server
IP Pools Server
8-59