Cisco 2509 - Router - EN User Manual page 128

AAA Server Configuration
Do one of the following:
Step 2
•
•
Result: The Add AAA Server page appears.
Step 3 In the AAA Server Name box, type a name for the remote AAA server (up to 32
characters).
Step 4 In the AAA Server IP Address box, type the IP address assigned to the remote
AAA server.
Step 5 In the Key box, type the shared secret that the remote AAA server and the
Cisco Secure ACS use to encrypt the data (up to 32 characters).
Note
From the Network Device Group list, select the NDG to which this AAA server
Step 6
belongs.
Note
Step 7 To enable watchdog packets, select the Log Update/Watchdog Packets from
this remote AAA Server check box.
Step 8 From the AAA Server Type list, select the AAA server type applicable to the
remote AAA server. If the remote AAA server is another Cisco Secure ACS,
identify it as such by selecting CiscoSecure ACS.
From the Traffic Type list, select the type of traffic you want to permit between
Step 9
the remote AAA server and Cisco Secure ACS.
User Guide for Cisco Secure ACS for Windows Server
4-24
If you are using NDGs, click the name of the NDG to which the AAA server
is to be assigned. Then, click Add Entry below the [name] AAA Servers
table.
To add a AAA server when you have not enabled NDGs, below the AAA
Servers table, click Add Entry.
The key is case sensitive. If the keys between the two AAA servers are not
identical when authentication is forwarded, the request is incorrectly
encrypted and authentication fails.
To enable NDGs, click Interface Configuration, click Advanced
Options, and then click Network Device Groups.
Chapter 4 Setting Up and Managing Network Configuration
78-14696-01, Version 3.1