Cisco 2509 - Router - EN User Manual page 220

Basic User Setup Options
Under Password Authentication in the User Setup table, select the applicable
Step 5
authentication type from the list.
Tip
Specify a single CiscoSecure PAP password by typing it in the first set of
Step 6
Password and Confirm Password boxes.
Note
Tip
Tip
Step 7 Do one of the following:
•
•
User Guide for Cisco Secure ACS for Windows Server
7-6
The authentication types that appear reflect the databases that you have
configured in the Database Configuration area of the External User
Databases section.
Up to 32 characters are allowed each for the Password box and the
Confirm Password box.
The CiscoSecure PAP password is also used for CHAP/MS-CHAP/ARAP
if the Separate CHAP/MS-CHAP/ARAP check box is not selected.
You can configure the AAA client to ask for a PAP password first and
then a CHAP or MS-CHAP password so that when users dial in using a
PAP password, they will authenticate. For example, the following line in
the AAA client configuration file causes the AAA client to enable CHAP
after PAP:
ppp authentication pap chap
To finish configuring the user account options and establish the user account,
click Submit.
To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Chapter 7 Setting Up and Managing User Accounts
78-14696-01, Version 3.1