Appendix C Radiu Attribute - Cisco 2509 - Router - EN User Manual

Cisco IOS Dictionary of RADIUS AV Pairs
Cisco IOS Dictionary of RADIUS AV Pairs
Note
Note
User Guide for Cisco Secure ACS for Windows Server
C-2
Cisco Building Broadband Service Manager Dictionary of RADIUS VSA,
•
page C-12
IETF Dictionary of RADIUS AV Pairs, page C-12
•
Microsoft MPPE Dictionary of RADIUS VSAs, page C-27
•
Ascend Dictionary of RADIUS AV Pairs, page C-30
•
• Nortel Dictionary of RADIUS VSAs, page C-42
Juniper Dictionary of RADIUS VSAs, page C-43
•
Cisco Secure ACS supports Cisco IOS RADIUS AV pairs. Before selecting AV
pairs for Cisco Secure ACS, confirm that your AAA client is a compatible release
of Cisco IOS or compatible AAA client software. For more information, see
System Requirements, page
If you specify a given AV pair on Cisco Secure ACS, the corresponding AV pair
must be implemented in the Cisco IOS software running on the network device.
Always take into consideration which AV pairs your Cisco IOS release supports.
If Cisco Secure ACS sends an AV pair that the Cisco IOS software does not
support, the attribute is not implemented.
Because IP pools and callback supersede them, the following RADIUS attributes
do not appear on the Group Setup page:
8, Framed-IP-Address
19, Callback-Number
218, Ascend-Assign-IP-Pool
None of these attributes can be set via RDBMS Synchronization.
Table C-1 lists the supported Cisco IOS RADIUS AV pairs.
2-2.
Appendix C RADIUS Attributes
78-14696-01, Version 3.1