Windows 2000 Registry
Windows 2000 Registry
Warning
CSAdmin
User Guide for Cisco Secure ACS for Windows Server
G-2
CSDBSync
•
CSLog
•
CSMon
•
•
CSTacacs
CSRadius
•
You can stop or restart Cisco Secure ACS services as a group, except for
CSAdmin, using the Cisco Secure ACS HTML interface. For more information,
see
Service Control, page
Individual Cisco Secure ACS services can be started, stopped, and restarted from
the Services window, available within the Windows 2000 Control Panel.
The Cisco Secure ACS information is located in the following Windows Registry
key:
HKEY_LOCAL_MACHINE\SOFTWARE\CISCO
Unless you are advised to do so by a Cisco representative, we strongly recommend
that you do not modify Windows Registry settings pertaining to
Cisco Secure ACS.
Do not modify the Registry unless you have enough knowledge and experience
to edit the file without destroying or corrupting crucial data.
CSAdmin is the service that provides the web server for the Cisco Secure ACS
HTML interface. After Cisco Secure ACS is installed, you must configure it from
its HTML interface; therefore, CSAdmin must be running when you configure
Cisco Secure ACS.
Because the Cisco Secure ACS web server uses port 2002 rather than the standard
port 80 usually associated with HTTP traffic, you can use another web server on
the same machine to provide other web services. We have not performed
Appendix G
8-2.
Cisco Secure ACS Internal Architecture
78-14696-01, Version 3.1