Cisco 2509 - Router - EN User Manual page 542

IETF Dictionary of RADIUS AV Pairs
Table C-6 RADIUS (IETF) Attributes (continued)
Attribute Number Description
Session-Timeout 27
Idle-Timeout 28
Termination- 29
Action
Called-Station-Id 30
Calling-Station-Id 31
User Guide for Cisco Secure ACS for Windows Server
C-20
Maximum number of seconds of
service to be provided to the user
before the session terminates. This
AV becomes the per-user absolute
timeout. This attribute is not valid
for PPP sessions.
Maximum number of consecutive
seconds of idle connection time
allowed to the user before the
session terminates. This AV
becomes the per-user
session-timeout. This attribute is not
valid for PPP sessions.
—
Allows the AAA client to send the
telephone number the call came from
as part of the access-request packet
using automatic number
identification or similar technology.
This attribute has the same value as
remote-addr in TACACS+. This
attribute is supported only on ISDN
and for modem calls on the Cisco
AS5200 if used with PRI.
Allows the AAA client to send the
telephone number the user called
into as part of the access-request
packet, using DNIS (Dialed Number
Identification Server) or similar
technology. This attribute is only
supported on ISDN and for modem
calls on the Cisco AS5200 if used
with PRI (Primary Rate Interface).
Appendix C RADIUS Attributes
Type of Inbound/
Value Outbound Multiple
integer Outbound No
(maximum
length 10
characters)
integer Outbound No
(maximum
length 10
characters)
integer Both
string Inbound
string Inbound
78-14696-01, Version 3.1
No
No
No