Cisco 2509 - Router - EN User Manual page 595

Appendix D Cisco Secure ACS Command-Line Database Utility
Before You Begin
•
•
•
To add a custom RADIUS VSA to Cisco Secure ACS, follow these steps:
On the Cisco Secure ACS server, open an MS DOS command prompt and change
Step 1
directories to the directory containing CSUtil.exe. For more information about the
location of CSUtil.exe, see
Type:
Step 2
CSUtil.exe -addUDV
where slot-number is an unused Cisco Secure ACS RADIUS vendor slot and
filename is the name of a RADIUS vendor/VSA import file. The filename can
include a relative or absolute path to the RADIUS vendor/VSA import file. Press
Enter.
For example, to add the RADIUS vendor defined in
the command would be:
CSUtil.exe -addUDV 5 d:\acs\myvsa.ini
Result: CSUtil.exe displays a confirmation prompt.
To confirm that you want to add the RADIUS vendor and halt all
Step 3
Cisco Secure ACS services during the process, type Y and press Enter.
Result: CSUtil.exe halts Cisco Secure ACS services, parses the vendor/VSA input
file, and adds the new RADIUS vendor and VSAs to Cisco Secure ACS. This
process may take a few minutes. After it is complete, CSUtil.exe restarts
Cisco Secure ACS services.
78-14696-01, Version 3.1
Define a custom RADIUS vendor and VSA set in a RADIUS vendor/VSA
import file. For more information, see
page D-33.
Determine the RADIUS vendor slot to which you want to add the new
RADIUS vendor and VSAs. For more information, see
RADIUS Vendors, page
Ensure that regedit is not running. If regedit is running on the
Cisco Secure ACS Windows server, it can prevent Registry updates required
for adding a custom RADIUS vendor and VSA set.
slot-number filename
User Guide for Cisco Secure ACS for Windows Server
User-Defined RADIUS Vendors and VSA Sets
RADIUS Vendor/VSA Import File,
D-31.
Location of CSUtil.exe and Related Files, page
Listing Custom
to slot 5,
d:\acs\myvsa.ini
D-2.
D-29