Updating Or Replacing A Cisco Secure Acs Certificate - Cisco 2509 - Router - EN User Manual

Cisco Secure ACS Certificate Setup
Step 10
Tip

Updating or Replacing a Cisco Secure ACS Certificate

Warning
Step 1
Step 2
Step 3
Step 4
User Guide for Cisco Secure ACS for Windows Server
8-80
Click Submit.
Result: Cisco Secure ACS displays a CSR in the display area, on the right, under
a banner that reads:
"Now your certificate signing request is ready. You
can copy and paste it into any certification authority enrollment
tool."
You can copy and paste this certificate to the online enrollment tool of any CA.
Use this procedure to update or replace an existing Cisco Secure ACS certificate
that is out-of-date or out-of-order.
This procedure eliminates your existing Cisco Secure ACS certificate.
To install a new ACS certificate, follow these steps:
In the navigation bar, click System Configuration.
Click ACS Certificate Setup.
Result: Cisco Secure ACS displays the Installed Certificate Information table on
the ACS Certificate Setup page.
If your Cisco Secure ACS has not already been enrolled with a certificate,
Note
you do not see the Installed Certificate Information table. Rather, you see
the Install new certificate table. If this is the case, you can proceed to
Step 5.
Click Enroll New Certificate.
Result: A confirmation dialog box appears.
To confirm that you intend to enroll a new certificate, click OK.
Result: The existing Cisco Secure ACS certificate is removed.
Chapter 8 Establishing Cisco Secure ACS System Configuration
78-14696-01, Version 3.1