Update Packets In Accounting Logs; About Cisco Secure Acs Logs And Reports - Cisco 2509 - Router - EN User Manual

Update Packets In Accounting Logs

Update Packets In Accounting Logs
Note

About Cisco Secure ACS Logs and Reports

User Guide for Cisco Secure ACS for Windows Server
9-4
Whenever you configure Cisco Secure ACS to record accounting data for user
sessions, Cisco Secure ACS records start and stop packets. If you want, you can
configure Cisco Secure ACS to record update packets, too. In addition to
providing interim accounting information during a user session, update packets
drive password expiry messages via CiscoSecure Authentication Agent. In this
use, the update packets are referred to as watchdog packets.
To record update packets in Cisco Secure ACS accounting logs, you must
configure your AAA clients to send the update packets. For more information
about configuring your AAA client to send update packets, refer to the
documentation for your AAA clients.
Logging Update Packets Locally—To log update packets on the local
•
Cisco Secure ACS server, enable the Log Update/Watchdog Packets from this
Access Server option for each AAA client in Network Configuration.
For more information on setting this option for a AAA client, see
AAA Client, page
• Logging Update Packets Remotely—To log update packets on a remote
logging server, enable the Log Update/Watchdog Packets from this remote
AAA Server option for the remote server AAA Server table entry on the local
Cisco Secure ACS server.
For more information on setting this option for a AAA server, see
AAA Server, page
The logs that Cisco Secure ACS provides can be divided into four groups:
Accounting Logs, page 9-5
•
Dynamic Administration Reports, page 9-7
•
• Cisco Secure ACS System Logs, page 9-11
Service Logs, page 9-28
•
Chapter 9
4-15.
4-23.
Working with Logging and Reports
Adding a
Adding a
78-14696-01, Version 3.1