Cisco 2509 - Router - EN User Manual page 158

Command Authorization Sets
c.
d.
Tip
e.
f.
Step 8 When you finish creating the command authorization set, click Submit.
Result: Cisco Secure ACS displays the name and description of the new command
authorization set in the applicable Command Authorization Sets table.
User Guide for Cisco Secure ACS for Windows Server
5-18
Enter only the command portion of the command/argument string
Note
here. Arguments are added only after the command is listed. For
example, with the command/argument string "show run" you would
type only the command show.
Click Add Command.
Result: The typed command is added to the command list box.
To add an argument to a command, in the command list box, select the
command and then type the argument in the box to the right of the command.
The correct format for arguments is <permit | deny> <argument>. For
Note
example, with the command show already listed, you might enter
permit run as the argument.
You can list several arguments for a single command by pressing Enter
between arguments.
To allow arguments, which you have not listed, to be effective with this
command, select the Permit Unmatched Args check box.
To add other commands to this command authorization set, repeat Step a
through Step e.
Chapter 5 Setting Up and Managing Shared Profile Components
78-14696-01, Version 3.1