Safety Symbols; Medical Devices; General Safety Considerations - Danfoss iC2-Micro Series Design Manual

Design Guide | iC2-Micro Frequency Converters
Table 1: Version History
Version
AJ402315027937, version 0401

Safety Symbols

1.5
The following symbols are used in Danfoss documentation.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
The guide also includes ISO warning symbols related to hot surfaces and burn hazard, high voltage and electrical shock, and referring to
the instructions.
ISO warning symbol for hot surfaces and burn hazard
ISO warning symbol for high voltage and electrical shock
ISO action symbol for referring to the instructions

Medical Devices

1.6
ELECTROMAGNETIC INTERFERENCE
AC drives and filters may produce electromagnetic interference up to 300 GHz that may affect the functionality of pacemakers
and other implanted medical devices.

General Safety Considerations

1.7
When installing or operating the AC drive, pay attention to the safety information given in the instructions. For more information about
safety guidelines for installation and operation, refer to the drive's operating guide.
10 | Danfoss A/S © 2024.08
Remarks
Update for general release 4.
DANGER
WARNING
CAUTION
NOTICE
WARNING
Introduction and Safety
AJ402315027937en-000401 / 130R1239