Export Control Regulation - Danfoss iC2-Micro Series Design Manual

Design Guide | iC2-Micro Frequency Converters

Export Control Regulation

2.3
AC drives can be subject to regional and/or national export control regulations. Both the EU and US have regulations for so-called dual-
use products (products for both military and non-military use), which currently includes AC drives with a capacity to operate from 600 Hz
upwards. These products can still be sold, but it requires a set of measures, for example a license, or an end-user statement.
The US also has regulations for AC drives with a capacity to operate 300–600 Hz with restrictions on sales for certain countries. US
regulations apply to all products manufactured in the US, exported from or via the US, or with a US content of more than 25%, or 10%
for some countries. An ECCN number is used to classify all AC drives that are subject to export control regulations. The ECCN number
is provided in the documentation accompanying the AC drive. If the AC drive is re-exported, it is the responsibility of the exporter to
ensure compliance with the relevant export control regulations.
For further information, contact Danfoss.
Danfoss A/S © 2024.08
Approvals and Certifications
AJ402315027937en-000401 / 130R1239 | 15