Show Dot1X - Cisco ME 3400 Command Reference Manual

show dot1x

show dot1x
Use the show dot1x privileged EXEC command to display IEEE 802.1x statistics, administrative status,
and operational status for the switch or for the specified port.
Syntax Description all
interface interface-id
statistics interface
interface-id
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines If you do not specify a port, global parameters and a summary appear. If you specify a port, details for
that port appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output appear.
Examples This is an example of output from the show dot1x and the show dot1x all privileged EXEC commands:
Switch# show dot1x
Sysauthcontrol
Dot1x Protocol Version
Dot1x Oper Controlled Directions
Dot1x Admin Controlled Directions = Both
Switch# show dot1x all
Dot1x Info for interface GigabitEthernet0/1
----------------------------------------------------
Supplicant MAC 00d0.b71b.35de
AuthSM State
BendSM State
PortStatus
MaxReq
HostMode
Port Control
Cisco ME 3400 Ethernet Access Switch Command Reference
2-374
show dot1x [all | interface interface-id | statistics interface interface-id] [ | {begin | exclude |
include} expression]
(Optional) Display the IEEE 802.1x status for all ports.
(Optional) Display the IEEE 802.1x status for the specified port (including
type, module, and port number).
(Optional) Display IEEE 802.1x statistics for the specified port (including
type, module, and port number).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
= CONNECTING
= IDLE
= UNAUTHORIZED
= 2
= Single
= Auto
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
= Enabled
= 1
= Both
OL-9640-07