Cisco ME 3400 Command Reference Manual page 519

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This is an example of output from the show parser macro name command:
Switch# show parser macro name sample-macro1
Macro name : sample-macro1
Macro type : customizable
duplex full
speed auto
mdix auto
This is an example of output from the show parser macro brief command:
Switch# show parser macro brief
Related Commands Command
macro apply
macro description
macro global
macro global
description
macro name
show running-config
OL-9640-07
customizable : sample-macro1
customizable : test1
Description
Applies a macro on an interface or applies and traces a macro on an interface.
Adds a description about the macros that are applied to an interface.
Applies a macro on a switch or applies and traces a macro on a switch.
Adds a description about the macros that are applied to the switch.
Creates a macro.
Displays the operating configuration. For syntax information, use this link to
the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_
reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate to
the command.
Cisco ME 3400 Ethernet Access Switch Command Reference
show parser macro
2-493