Cisco ME 3400 Command Reference Manual page 673

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
•
The Layer 2 traceroute feature is not supported when multiple devices are attached to one port through
hubs (for example, multiple CDP neighbors are detected on a port). When more than one CDP neighbor
is detected on a port, the Layer 2 path is not identified, and an error message appears.
This feature is not supported in Token Ring VLANs.
Examples This example shows how to display the Layer 2 path by specifying the source and destination IP
addresses and by using the detail keyword:
Switch# traceroute mac ip 2.2.66.66 2.2.22.22 detail
Translating IP to mac .....
2.2.66.66 => 0000.0201.0601
2.2.22.22 => 0000.0201.0201
Source 0000.0201.0601 found on con6[WS-C2950G-24-EI] (2.2.6.6)
con6 / ME-3400-24TS-/ 2.2.6.6 :
con5 / WS-C2950G-24-EI / 2.2.5.5 :
con1 / WS-C3550-12G / 2.2.1.1 :
con2 / WS-C3550-24 / 2.2.2.2 :
Destination 0000.0201.0201 found on con2[WS-C3550-24] (2.2.2.2)
Layer 2 trace completed.
This example shows how to display the Layer 2 path by specifying the source and destination hostnames:
Switch# traceroute mac ip con6 con2
Translating IP to mac .....
2.2.66.66 => 0000.0201.0601
2.2.22.22 => 0000.0201.0201
Source 0000.0201.0601 found on con6
con6 (2.2.6.6) :Gi0/1 => Gi0/3
con5
con1
con2
Destination 0000.0201.0201 found on con2
Layer 2 trace completed
This example shows the Layer 2 path when ARP cannot associate the source IP address with the
corresponding MAC address:
Switch# traceroute mac ip 2.2.66.66 2.2.77.77
Arp failed for destination 2.2.77.77.
Layer2 trace aborted.
Related Commands Command
shutdown
OL-9640-07
If an ARP entry does not exist, the switch sends an ARP query and tries to resolve the IP address.
The IP addresses must be in the same subnet. If the IP address is not resolved, the path is not
identified, and an error message appears.
Gi0/1 [auto, auto] => Gi0/3 [auto, auto]
Fa0/3 [auto, auto] => Gi0/1 [auto, auto]
Gi0/1 [auto, auto] => Gi0/2 [auto, auto]
Gi0/2 [auto, auto] => Fa0/1 [auto, auto]
(2.2.5.5
(2.2.1.1
(2.2.2.2
Description
Displays the Layer 2 path taken by the packets from the specified source MAC
address to the specified destination MAC address.
) : Gi0/3 => Gi0/1
) : Gi0/1 => Gi0/2
) : Gi0/2 => Fa0/1
Cisco ME 3400 Ethernet Access Switch Command Reference
traceroute mac ip
2-647