Ip Dhcp Snooping Trust - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

ip dhcp snooping trust

Use the ip dhcp snooping trust interface configuration command to configure a port as trusted for
DHCP snooping purposes. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults DHCP snooping trust is disabled.
Command Modes Interface configuration
Command History Release
12.2(25)EX
Usage Guidelines Configure as trusted ports those that are connected to a DHCP server or to other switches or routers.
Configure as untrusted ports those that are connected to DHCP clients.
Examples This example shows how to enable DHCP snooping trust on a port:
Switch(config-if)# ip dhcp snooping trust
You can verify your settings by entering the show ip dhcp snooping privileged EXEC command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping binding
OL-9640-07
ip dhcp snooping trust
no ip dhcp snooping trust
Modification
This command was introduced.
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Cisco ME 3400 Ethernet Access Switch Command Reference
ip dhcp snooping trust
2-147