Cisco ME 3400 Command Reference Manual page 302

police
conform-action
set-cos-transmit
new-cos-value
set-dscp-transmit
new-dscp-value
set-prec-transmit
new-precedence-value
set-qos-transmit
qos-group-value
cos
dscp
precedence
table table-map name
transmit
exceed action
drop
Defaults
No policers are defined. Conform burst (bc) is automatically configured to 250 ms at the configured CIR.
Command Modes
Policy-map class configuration
Command History Release
12.2(25)EX
12.2(25)SEG
Cisco ME 3400 Ethernet Access Switch Command Reference
2-276
Chapter 2
(Optional) Action to be taken for packets that conform to (are less than or
equal to) the CIR.
Set a new class of service (CoS) value for the packet and send the packet.
This specifies the to-type of the marking action. The range for the new CoS
value is 0 to 7.
Set a new Differentiated Services Code Point (DSCP) value for the packet
and send the packet. This specifies the to-type of the marking action. The
range for the new DCSP value is 0 to 63.
Set a new IP precedence value for the packet and send the packet. This
specifies the to-type of the marking action. The range for the new IP
precedence value is 0 to 7.
Set a new quality of service (QoS) group value for the packet and send the
packet. This specifies the to-type of the marking action. The range for the
new QoS value is 0 to 99.
(Optional) Set the packet marking specified in the preceding keyword based
on the CoS value of the incoming packet, and send the packet. This specifies
the from-type of the enhanced packet-marking action.
(Optional) Set the packet marking specified in the preceding keyword based
on the DSCP value of the incoming packet, and send the packet. This
specifies the from-type of the enhanced packet-marking action.
(Optional) Set the packet marking specified in the preceding keyword based
on the IP precedence value of the incoming packet, and send the packet. This
specifies the from-type of the enhanced packet-marking action.
(Optional) Used with the preceding from-type keyword. Specify the table
map to be used for the enhanced packet marking. The to-type of the action is
marked based on the from-type parameter of the action using this table map.
(Optional) Send the packet unmodified.
(Optional) Action to be taken for packets that do not conform to the CIR.
Drop the packet.
Modification
This command was introduced.
Increased support for configuring conform and exceed actions. See "Usage
Guidelines."
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07