Show Class-Map - Cisco ME 3400 Command Reference Manual

show class-map

show class-map
Use the show class-map user EXEC command to display quality of service (QoS) class maps, which
define the match criteria to classify traffic.
Syntax Description class-map-name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(25)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show class-map command:
Switch> show class-map
Class Map match-all videowizard_10-10-10-10 (id 2)
Match access-group name videowizard_10-10-10-10
Class Map match-any class-default (id 0)
Match any
Class Map match-all dscp5 (id 3)
Match ip dscp 5
Related Commands Command
class-map
match access-group
Cisco ME 3400 Ethernet Access Switch Command Reference
2-358
show class-map [class-map-name] [ | {begin | exclude | include} expression]
(Optional) Display the contents of the specified class map.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Description
Creates a class map to be used for matching packets to the class
whose name you specify.
Defines the match criteria to classify traffic.
OL-9640-07