Clear Rep Counters - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

clear rep counters

Use the clear rep counters privileged EXEC command to clear Resilient Ethernet Protocol (REP)
counters for the specified interface or all interfaces.
Syntax Description interface interface-id
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(46)SE
Usage Guidelines
You can clear all REP counters by using the clear rep counters command, or you can clear only the
counters for the interface by using the clear rep counters interface interface-id command.
When you enter the clear rep counters command, only the counters visible in the output of the show
interface rep detail command are cleared. SNMP visible counters are not cleared as they are read-only.
Examples
This example shows how to clear all REP counters for all REP interfaces:
Switch# clear rep counters
You can verify that REP information was deleted by entering the show interfaces rep detail privileged
EXEC command.
Related Commands Command
show interfaces rep
OL-9640-07
clear rep counters [interface interface-id]
(Optional) Specify a REP interface whose counters should be cleared.
Modification
This command was introduced.
detail
Description
Displays detailed REP configuration and status information.
Cisco ME 3400 Ethernet Access Switch Command Reference
clear rep counters
2-51