Show Platform Spanning-Tree Synchronization - Cisco ME 3400 Command Reference Manual

Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands

show platform spanning-tree synchronization

Use the show platform spanning-tree synchronization privileged EXEC command to display
platform-dependent spanning-tree state synchronization information.
Syntax Description detail
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-9640-07
show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude |
include} expression]
(Optional) Display detailed spanning-tree synchronization information.
(Optional) Display spanning-tree synchronization information for the specified
VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform spanning-tree synchronization
Cisco ME 3400 Ethernet Access Switch Command Reference
C-41