Cisco ME 3400 Command Reference Manual page 513

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

This is an example of output from the show mvr interface command:

Switch# show mvr interface

Fa0/10 Source

In the preceding display, Status is defined as follows:

This is an example of output from the show mvr interface fastethernet0/10 command:

switch# show mvr interface fa0/10

This is an example of output from the show mvr interface fastethernet0/1 command. In this example,

the port is not an MVR member:

switch# show mvr interface fa0/1

This is an example of output from the show mvr interface gigabitethernet0/1 members command:

Switch# show mvr interface gigabitethernet0/1 members

Related Commands

mvr (global configuration)

mvr (interface configuration)

show mvr members

Active means the port is part of a VLAN.

Up/Down means that the port is forwarding/nonforwarding.

Inactive means that the port is not yet part of any VLAN.

DYNAMIC ACTIVE

Enables and configures multicast VLAN registration on the

Configures MVR ports.

Displays the global MVR configuration on the switch.

Displays all receiver ports that are members of an MVR

multicast group.

Cisco ME 3400 Ethernet Access Switch Command Reference

show mvr interface

Immediate Leave

---------------

Immediate Leave

---------------

Immediate Leave

---------------

Show Quick Links

Table of Contents