Clear Ip Arp Inspection Statistics - Cisco ME 3400 Command Reference Manual

clear ip arp inspection statistics

clear ip arp inspection statistics
Use the clear ip arp inspection statistics privileged EXEC command to clear the dynamic Address
Resolution Protocol (ARP) inspection statistics.
Syntax Description vlan vlan-range
Defaults No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(25)EX
12.2(50)SE
Examples
This example shows how to clear the statistics for VLAN 1:
Switch# clear ip arp inspection statistics vlan 1
You can verify that the statistics were deleted by entering the show ip arp inspection statistics vlan 1
privileged EXEC command.
Related Commands Command
show ip arp inspection
statistics
Cisco ME 3400 Ethernet Access Switch Command Reference
2-38
clear ip arp inspection statistics [vlan vlan-range]
(Optional) Clear statistics for the specified VLAN or VLANs.
You can specify a single VLAN identified by VLAN ID number, a range of
VLANs separated by a hyphen, or a series of VLANs separated by a comma.
The range is 1 to 4094.
Modification
This command was introduced.
The command was supported in the metro base image.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Description
Displays statistics for forwarded, dropped, MAC validation failure, and
IP validation failure packets for all VLANs or the specified VLAN.
OL-9640-07