Cisco ME 3400 Command Reference Manual page 90

deny (ARP access-list configuration)
Command History Release
12.2(25)EX
12.2(50)SE
Usage Guidelines You can add deny clauses to drop ARP packets based on matching criteria.
Examples This example shows how to define an ARP access list and to deny both ARP requests and ARP responses
from a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:
Switch(config)# arp access-list static-hosts
Switch(config-arp-nacl)# deny ip host 1.1.1.1 mac host 0000.0000.abcd
Switch(config-arp-nacl)# end
You can verify your settings by entering the show arp access-list privileged EXEC command.
Related Commands Command
arp access-list
ip arp inspection filter vlan
permit (ARP access-list
configuration)
show arp access-list
Cisco ME 3400 Ethernet Access Switch Command Reference
2-64
Chapter 2
Modification
This command was introduced.
The command was supported in the metro base image.
Description
Defines an ARP access control list (ACL).
Permits ARP requests and responses from a host configured with a
static IP address.
Permits an ARP packet based on matches against the DHCP bindings.
Displays detailed information about ARP access lists.
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07