Cisco ME 3400 Command Reference Manual page 537

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Examples This is an example of output from the show sdm prefer command, displaying the template in use:
Switch# show sdm prefer
The current template is ''layer-2'' template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups:
number of IPv4 multicast routes:
number of unicast IPv4 routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
This is an example of output from the show sdm prefer default command:
Switch# show sdm prefer default
"default" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
This is an example of output from the show sdm prefer dual-ipv4-and-ipv6 routing command:
Switch# show sdm prefer dual-ipv4-and-ipv6 routing
"desktop IPv4 and IPv6 routing" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of IPv6 multicast groups:
number of directly-connected IPv6 addresses:
number of indirect IPv6 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
number of IPv6 policy based routing aces:
number of IPv6 qos aces:
number of IPv6 security aces:
Related Commands Command
sdm prefer
OL-9640-07
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
Description
Sets the SDM template to maximize resources for Layer 2 functionality or to
the default template.
8K
1K
0
0
0
512
1K
5K
1K
9K
5K
4K
512
512
1K
1.5K
1K
2.75K
1.5K
1.25K
1.125k
1.5K
1.25K
0.25K
0.75K
0.5K
0.25K
0.5K
0.5K
Cisco ME 3400 Ethernet Access Switch Command Reference
show sdm prefer
2-511