Cisco ME 3400 Command Reference Manual page 525

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This is an example of output from the show policy-map command for a specific policy map:
Switch> show policy-map top2
Policy Map top2
Class class-default
This is an example of output from the show policy-map command for an output policy map:
Switch> show policy-map pout
Policy Map pout
Class ip1
Class ip2
Class ip3
This is an example of output from the show policy-map command for an input policy map:
Switch> show policy-map pin-police
Policy Map pin-police
Class ip1
This is an example of output from the show policy-map interface command for an interface with a
two-level output policy map applied:
Switch> show policy-map interface fastethernet0/3
FastEthernet0/3
Service-policy output: top2
Class-map: class-default (match-any)
OL-9640-07
shape average 11111124
service-policy pout
priority
police cir percent 10
conform-action transmit
exceed-action drop
queue-limit 250
queue-limit precedence
Average Rate Traffic Shaping
cir 5%
bandwidth percent 10
queue-limit 200
queue-limit precedence
police cir 20000000 bc 625000
conform-action transmit
exceed-action drop
209871 packets
Match: any
56 packets
Traffic Shaping
Average Rate Traffic Shaping
CIR 11111124 (bps)
Output Queue:
Tail Packets Drop: 195421
Service-policy : pout
Class-map: ip1 (match-all)
9309 packets
Match: ip precedence 1
Priority
police cir 20000000 bc 625000
conform-action transmit
exceed-action drop
conform: 4916 (packets) exceed: 4393 (packets)
1 100
3 100
Cisco ME 3400 Ethernet Access Switch Command Reference
show policy-map
2-499