Clear Spanning-Tree Counters - Cisco ME 3400 Command Reference Manual

clear spanning-tree counters

clear spanning-tree counters
Use the clear spanning-tree counters privileged EXEC command to clear the spanning-tree counters.
Syntax Description
interface interface-id
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines
If the interface-id is not specified, spanning-tree counters are cleared for all STP ports.
Examples This example shows how to clear spanning-tree counters for all STP ports:
Switch# clear spanning-tree counters
Related Commands Command
show spanning-tree
Cisco ME 3400 Ethernet Access Switch Command Reference
2-52
clear spanning-tree counters [interface interface-id]
(Optional) Clear all spanning-tree counters on the specified interface. Valid
interfaces include physical network node interfaces (NNIs), enhanced
network interfaces (ENIs) on which spanning tree has been enabled, VLANs,
and spanning-tree port channels. The VLAN range is 1 to 4094. The
port-channel range is 1 to 48.
Note
Modification
This command was introduced.
Description
Displays spanning-tree state information.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Spanning Tree Protocol (STP) is not supported on user network
interfaces (UNIs). Though visible in the command-line help, the
command has no effect on UNIs or on ENIs on which STP is not
enabled.
OL-9640-07