Cisco ME 3400 Command Reference Manual page 218

ipv6 traffic-filter
Examples This example filters inbound IPv6 traffic on an IPv6-configured interface as defined by the access list
named cisco:
Switch (config)# interface gigabitethernet0/1
Switch(config-if)# no switchport
Switch(config-if)# ipv6 address 2001::/64 eui-64
Switch(config-if)# ipv6 traffic-filter cisco in
Related Commands Command
ipv6 access-list
show ipv6 access-list
show ipv6 interface
Cisco ME 3400 Ethernet Access Switch Command Reference
2-192
Chapter 2
Description
Defines an IPv6 access list and sets deny or permit conditions for the
defined access list.
Displays the contents of all current IPv6 access lists.
Displays the usability status of interfaces configured for IPv6.
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07