Archive Tar - Cisco ME 3400 Command Reference Manual

archive tar

archive tar
Use the archive tar privileged EXEC command to create a tar file, list files in a tar file, or extract the
files from a tar file.
Syntax Description /create destination-url
flash:/file-url
/table source-url
Cisco ME 3400 Ethernet Access Switch Command Reference
2-10
archive tar {/create destination-url flash:/file-url} | {/table source-url} | {/xtract source-url
flash:/file-url [dir/file...]}
Create a new tar file on the local or network file system.
For destination-url, specify the destination URL alias for the local or
network file system and the name of the tar file to create. These options
are supported:
The tar-filename.tar is the tar file to be created.
For flash:/file-url, specify the location on the local flash file system from
which the new tar file is created.
An optional list of files or directories within the source directory can be
specified to write to the new tar file. If none are specified, all files and
directories at this level are written to the newly created tar file.
Display the contents of an existing tar file to the screen.
For source-url, specify the source URL alias for the local or network file
system. These options are supported:
The tar-filename.tar is the tar file to display.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
The syntax for the local flash filesystem:
•
flash:
The syntax for the FTP:
•
ftp:[[//username[:password]@location]/directory]/tar-filename.tar
The syntax for the Remote Copy Protocol (RCP) is:
•
rcp:[[//username@location]/directory]/tar-filename.tar
• The syntax for the TFTP:
tftp:[[//location]/directory]/tar-filename.tar
The syntax for the local flash file system:
•
flash:
The syntax for the FTP:
•
ftp:[[//username[:password]@location]/directory]/tar-filename.tar
The syntax for the RCP:
•
rcp:[[//username@location]/directory]/tar-filename.tar
The syntax for the TFTP:
•
tftp:[[//location]/directory]/tar-filename.tar
OL-9640-07