Cisco ME 3400 Command Reference Manual page 346

rep segment
You can verify your settings by entering the show interfaces rep privileged EXEC command. To verify
which port in the segment is the primary edge port, enter the show rep topology privileged EXEC
command.
Related Commands Command
show interfaces rep
[detail]
show rep topology
[detail]
Cisco ME 3400 Ethernet Access Switch Command Reference
2-320
Chapter 2
Description
Displays REP configuration and status for all interfaces or the specified
interface.
Displays information about all ports in the segment, including which one was
configured and selected as the primary edge port.
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07