Table of Contents
Advertisement
Figure 6-41. SNMP Manager Configuration screen
The following SNMP Manager and Trap Manager Configuration
parameters can be set:
SNMP Community String/Trap Community String The
community string that will be included on SNMP packets sent
to and from the Switch. Any station not privy to this
community will not receive the packet.
Access Right Allows each community to be separately set to
either Read Only, meaning that the community member can
only view switch settings or Read/Write, which allows the
member to change settings in the switch.
Status/Trap Status Determines whether this community
name entry is Valid or Invalid. An entry can be disabled by
changing its status to Invalid.
IP Address
station to receive traps.
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
The IP address of the network management
105
Advertisement
Table of Contents
