Rear Panel
The rear panel of the Switch consists of an AC power
connector and on/off switch. The following shows the rear
panel of the Switch.
AC Power Connector This is a three-pronged connector
that supports the power cord. Plug in the female connector
of the provided power cord into this connector, and the
male into a power outlet. Supported input voltages range
from 100 ~ 240 VAC at 50 ~ 60 Hz.
LED Indicators
The LED indicators of the Switch include Power, 10/100/1000M
LINK/ACT,
following shows the LED indicators for the Switch along with
an explanation of each indicator.
Rear panel view of the Switch
and
Full-Duplex/Collision
12
(FDX/COL).
The