Chapter 10
Viewing RIP
Statistics Using
the CLI
10-8
2. To modify your RIP statistics:
Click CLEAR to reset all the entries.
—
Click REFRESH to receive the most up-to-date
—
information on the entries.
3. Use Table 10-3 to interpret the RIP statistics:
Table 10-3. RIP Statistical Parameters
Parameter
Interface
State
IP Address
Triggered Updates
Sent
Non-Triggered
Updates Sent
Updates Received
Bad Packets
Received
Bad Routes
Received
To view RIP statistics using the CLI, enter the following command
from Configure mode:
> (configure)# show ip rip statistics
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Defines the...
Interface associated with the IP address specified.
Current status of the RIP route. UP indicates that
the interface is up and RIP can transmit and receive
updates.
IP address associated with the interface.
Number of RIP triggered updates sent.
Number of RIP non-triggered updates sent.
Number of RIP updates received based on route
changes in the IP routing table.
Number of bad packets received on this interface.
Number of bad routes received on this interface.
Cajun P550/P880/P882 Switch User Guide