Interpreting Ipx Sap Interface Statistics Using The Cli - Avaya Cajun P550R User Manual
Avaya p550r: user guide
Hide thumbs
Also See for Cajun P550R:
- Cli reference manual (617 pages) ,
- User manual (174 pages) ,
- Installation manual (62 pages)
Table of Contents
Advertisement
Interpreting IPX
SAP Interface
Statistics Using
the CLI
Cajun P550/P880/P882 Switch User Guide
2. Refer to Table 14-4 to interpret your IPX SAP interface
statistics:
Table 14-4. IPX SAP Interface Statistical Parameters
Parameter
Interface
State
Network Number
Triggered Updates
Sent
Non-triggered
Updates Sent
GNS Responses Sent
Updates Received
Requests Received
GNS Requests
Received
Bad Packets Received
3. Click on CLEAR to remove the statistics, or REFRESH to
access current interface statistics.
To interpret IPX SAP interface statistics using the CLI, enter the
following command from Interface mode:
cajun(config-if <interface name>)# show ipx
interface [<intf-name>]
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring IPX SAP Protocol
Definition
The IPX interface associated with this SAP
interface.
The current state of the SAP interface.
The network number of the IPX network
associated with the interface.
The number of triggered updates sent from the
SAP interface.
The number of non-triggered updates sent from
the SAP interface.
The number of GNS responses sent from the SAP
interface.
The number of updates received. Updates may be
received periodically even if no changes have
occurred.
The number of requests received on the SAP
interface.
The number of GNS requests received on the SAP
interface.
The number of bad packets received on the SAP
interface.
14-13
Advertisement
Table of Contents
