Avaya Cajun P550R User Manual page 398

Chapter 15
15-6
Table 15-1. Add AppleTalk Interface Dialog Box Parameters
Parameter Definition
Network
Enter the starting network number. The network
Range Start
number specifies the range of AppleTalk network
numbers for extended networks. Each number in the
range must be an integer between 0 and 65279.
Note:
Network
Enter the ending network number. The network
Range End number specifies the range of AppleTalk network
numbers for extended networks. Each number in the
range must be an integer between 0 and 65279.
Note:
Network Enter the interface network number. This number
Number specifies the network number the interface is using.
Note:
Node Enter the interface node identification number. This
number must be between 1 and 253.
Note:
Admin State Select whether to enable or disable the administrator
state. The administrator state determines if the
interface is operational from a management point of
view.
Zone
Select the default AppleTalk zone to be used by this
interface. Zone names may be up to 32 characters in
length.
5. Click CREATE to add the new AppleTalk interface, or
CANCEL to restore previous settings.
continued
The Network Range Start value must be less
than or equal to the Network Range End
value.
If the Network Range Start value equals 0,
then the Network Range End value must also
equal 0.
This value must be within the Network Range
or be equal to 0.
Only if the Network Number is equal to 0, can
the Node also be equal to 0.
Cajun P550/P880/P882 Switch Configuration Guide