Configuring Fast Start Mode Using The Cli; Using The All Module Ports Configuration Window - Avaya Cajun P550R User Manual

Avaya p550r: user guide

Hide thumbs Also See for Cajun P550R:

Table of Contents

Fast Start Mode

Using the CLI

To configure Fast Start mode for ports on a module associated with a

selected bridge using the CLI, enter the following command from

Configure mode:

> (configure)# set port fast-start <options>

Refer to the Cajun P500/P880/P882 Switch Command Line Interface

Reference Guide for more details about this command.

The All Ports Configuration window allows you to apply the same

parameter settings to all switch ports in a module using a single

To set all switch ports in a module using a single command:

1. Select Configuration from the Modules & Ports group on the

web agent window. The Module Information dialog box

opens (Figure 5-12).

2. Select the checkbox in the Slot column next to the module on

which you want to configure all of its ports.

3. Select the number in the Ports column for that module. The

Physical Port Configuration dialog box for that module opens

(Figure 5-14).

Cajun P550/P880/P882 Switch User Guide

Cajun p880 Cajun p882