Chapter 2
Setting Up User Accounts
Setting Up User
Accounts Using
the Web Agent
2-10
Figure 2-7. Operation Folder Contents
3. Select an operation (i.e., General). The web agent dialog box
for that operation opens on the right side.
4. Complete the operation.
The following configuration procedures are written assuming you
have already logged onto the Cajun Switch Web Agent.
You can setup User Accounts using either the web agent or the
CLI.
To setup a user account using the Web Agent:
1. Select User Logins from the System > Administration group
on the web agent window. The User Account Management
dialog box opens (Figure 2-8).
Cajun P550/P880/P882 Switch User Guide