Chapter 9
Configuring the
DVMRP Global
Configuration
Using the CLI
Modifying a DVMRP Interface
Modifying the
DVMRP
Interface Using
the Web Agent
9-36
To configure DVMRP globally using the CLI:
cajun (configure <interface-name>)# ip dvmpr
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
You can modify a DVMRP interface using either the web agent or
the CLI.
To modify a DMVRP interface using the web agent:
1. Select Interfaces from the Routing > DVMRP group of the
web agent window. The DVMRP Interfaces dialog box opens
(see Figure 9-17).
Figure 9-17. DVMRP Interfaces Dialog Box
* Note: You must first enable a multicast protocol before you can
configure DVMRP. Refer to "Creating an IP Interface",
earlier in this chapter, and enable a multicast protocol
for this interface.
Cajun P550/P880/P882 Switch User Guide