Avaya Cajun P550R User Manual page 475

Cajun P550/P880/P882 Switch User Guide
4. Refer to Table 17-7 for an explanation of the items listed in
the Class column on the General Event Management dialog
box:
Table 17-7. Class Column Items
Class
Start
System
Configuration
Temperature Status
Resource
Fan Status
Service Port Status/
User Port Status
Authentication
Failure
Bridge Status
Switch Fabric
OSPF
RIP
LDAP
AppleTalk
5. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Monitoring the Cajun Switch
Determines whether or not the switch
sends a notification...
Upon system start.
For system events.
For each configuration change (for example,
enabling and disabling ports).
Of temperature status changes. Temperature
status message could precede a switch
shutdown, and are often critical.
Upon a change in system resources.
Of fan status. Fan failures will eventually lead to
overheating the system. Fan Status message
provide a good early warning for a failure that
could eventually cause the switch to shut down.
Of Port status changes for service and user ports.
Set a port as either service port/user port from
the port configuration page. The purpose of this
feature is to allow you to use different
notification level for critical (service ports), if
desired.
When the switch detects an authentication
failure. This is a security-related feature used to
detect unauthorized SNMP activity.
Of changes in bridge status.
Of failures in the switch fabric. These are critical
failures and should be monitored closely.
For OSPF events if OSPF protocol event logging
is enabled.
For RIP events if RIP protocol event logging is
enabled.
For LDAP events if LDAP protocol event logging
is enabled.
For AppleTalk events if AppleTalk protocol event
logging is enabled.
17-15