Enabling Vrrp On An Interface; Enabling Vrrp On An Interfere Using The Web Agent; Ip Interface Dialog Box - Avaya Cajun P550R User Manual

Enabling VRRP on an Interface

Enabling VRRP
on an Interfere
Using the Web
Agent
Cajun P550/P880/P882 Switch User Guide
You can enable VRRP on an interface using either the web agent or
the CLI.
* Note: You must first enable VRRP globally before you can
enable VRRP on an interface. Refer to the "Globally
Enabling VRRP" section.
To enable an VRRP on an interface using the web agent:
1. Select Interfaces from the Routing > IP > Configuration group
on the web agent window. The IP Interfaces dialog box opens
(Figure 9-31).
* Note: Due to the length of the IP Interfaces dialog box,
it is divided into two figures in Figure 9-31.
Figure 9-31. IP Interface Dialog Box
2. Select the interface that you want to enabled.
3. Select Enable from the VRRP field pull-down menu for the
interface you selected.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Configuring IP Routing
9-69