Avaya Cajun P550R User Manual page 508

Chapter 20
20-6
Table 20-2. Buffer Detail Configuration Dialog Box Parameters
Parameter Definition ...
High Priority Displays the percent of the buffer's queuing space allotted
Allocation
to high priority traffic. Because the high-priority queue is
serviced more frequently than the normal priority queue,
raising this value may not necessarily provide better
service. In fact, if you are using the high-priority queue
for delay-sensitive traffic, you may want to reduce the
amount of memory devoted to the high-priority queue.
This ensures that packets that cannot be delivered in a
timely manner are discarded. If you want the high
priority queue to guarantee delivery of as many packets
as possible, regardless of delay, increase this value. The
change does not take effect until you reset the switch.
Priority
Allows you to set this parameter to the value at which the
Threshold Cajun P550 switch starts sending packets to the high-
priority queue. The default value (4) causes all traffic
with a priority greater than or equal to 4 (4, 5, 6, and 7)
to be assigned to the high-priority queue. Priority
schemes have more than two queues (the IEEE allows up
to 8, numbered 0 through 7). Avaya recommends that
you do not change this parameter.
High Priority
Allows you to set how many times the high priority
Service Ratio queue is serviced for each time the low priority queue is
serviced. The ideal value changes from queue to queue,
but the goal is to ensure that traffic mix guarantees
optimal mix between high-priority and best effort traffic.
High and
Displays the number of packets dropped because the
Normal
associated buffer is full. Indicates that the device
Overflow
immediately before the queue is processing traffic faster
Drops than the next downstream element can process the same
volume of traffic. For example, overflow drops on the
input buffer indicate that traffic is arriving faster than the
switch matrix can process it. Overflow drops on the
output buffers indicates that the output port cannot
handle the volume of the load being offered.
High and
Displays the number of packets dropped because they
Normal Stale
timed out waiting for service (using the age timer value).
Drops
In the high-priority queue, this can help determine how
efficiently the switch is processing "better never than
late" traffic. Excessive stale drops on the high-priority
queue may indicate the need to increase the service ratio
on the high-priority queue.
Congestion Displays the number of packets dropped because the
Drops
switch controller has sensed congestion at the outbound
port.
continued
Cajun P550/P880/P882 Switch User Guide