Configuring Ipx Sap Interfaces Using The Cli - Avaya Cajun P550R User Manual

Configuring IPX
SAP Interfaces
Using the CLI
Cajun P550/P880/P882 Switch User Guide
Table 14-1. IPX SAP Interface Dialog Box Parameters continued
Parameter
Triggered Updates
Get Nearest Server
Reply
Get Nearest Server
Reply Delay
Mode
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To configure the IPX SAP interfaces using the CLI, enter the
following command from Interface mode:
cajun(conf-if <interface-name>):# ipx sap
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring IPX SAP Protocol
Allows you to...
Select one of the following from the pull-down
menu:
• Disable – To prevent SAP updates from
being immediately transmitted to the
network in response to changes in the
network topology
• Enable – To allow SAP updates to be
immediately transmitted to the network in
response to changes in the network topology
(default).
Select one of the following from the pull-down
menu:
• Disable – To prevent the router from
responding to Get Nearest Server requests
received on the interface
• Enable – To allow the router to respond to
Get Nearest Server requests received on
the interface (default).
Specify the delay (in msecs) to wait before
responding to a Get Nearest Service request
received on the interface.
Select one of the following from the pull-down
menu:
• Talk/Listen - Send and receive
advertisements (default).
• Talk Only - Send advertisements.
• Listen Only - Receive advertisements.
14-3