Rip Cli Commands - Avaya C360 Installation And Configuration Manual

Avaya C360 Layer 3 Features

RIP CLI Commands

166 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Configure the Routing
Information Protocol (RIP)
Specify a list of networks on
which the RIP is running
Redistribute routing information
from other protocols into RIP
Specify the RIP version running
on the interface basis
Set the interface RIP route
metric value
Set the RIP Send and Receive
mode on an interface
Enable learning of the default
route received by the RIP
Enable split-horizon with
poison-reverse on an interface
Enable split-horizon mechanism
Specify the type of
authentication used in RIP
Version 2 packets
Set the authentication string
used on the interface
Specify the RIP timers values
Use the following command...
router rip
network
redistribute
ip rip rip-version
default-metric
ip rip send-receive
ip rip default-route-mode
ip rip poison-reverse
ip rip split-horizon
ip rip authentication mode
ip rip authentication key
timers basic