Managing
Buffers and
Queues Using
the CLI
Cajun P550/P880/P882 Switch User Guide
7. Repeat Steps 1-4 to tune Physical Port (Fast Ethernet) buffers.
Physical Port ports have additional buffers on both the input
and output ports.
8. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To manage buffers and queues using the CLI, enter the following
command from Configure mode:
cajun(configure)# set buffering port <mod-swport-spec>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Tuning Your Switch Performance
20-7