Xnnet Expansion Board; Applicability Notice; Overview - AMX Optima Instruction Manual

XNNet Expansion Board

Applicability Notice

XNNet expansion board
FIG. 73
XNNet expansion board
This chapter pertains to the Optima 2 RU XNNet expansion board, SA1046-310.

Overview

An XNNet expansion board is required to attach an external XNNet device to an Optima 2 RU
enclosure.
An XNNet device is any device that sends and receives XNNet protocol over the Remote (XNNet) port.
AMX XNNet control devices include remote control panels (e.g., the CP-15 and CP-20A). AMX XNNet
accessory devices include Single Bus Controllers (SBCs) and Preset SBCs.
Note: Optima 3 RU enclosures have a Remote port on the CPU.
Board Ordered with System
If ordered with the system, the XNNet board is installed at the factory. For information on connecting a
device to the XNNet board, see page 119.
Board Ordered as Upgrade to System
If the board is ordered as an upgrade for an existing system, it will need to be installed. For instructions
on installing an expansion board, see page 118.
XNNet Device Ordered with System
If an XNNet device is included in the order, see the device's documentation for its installation
information.
Optima Instruction Manual
XNNet Expansion Board
117