2 - 6
MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Pole Mounting
The Pole Mounting Kit accommodates poles up to 11.5 inches in diameter. To install the MK1200 using the Pole
Mounting Kit:
Wrap the pole mount straps around the pole and tighten.
1.
Secure the connector port cover to the pole mount bracket using the four shoulder screws.
2.
Connect the cables to the MK1200 (see
3.
correctly (see
MK1200 is attached to the Connector/Port Cover.
Position the MK1200 keyholes located on the back housing (see
4.
head bolts and slide the MK1200 to the left and down to secure in place. See
and
Mounting Directions on page
Screw one 8-32 pan head locking screw into the pole mount bracket bottom left tab. See
5.
2-6. Hand tighten the locking screw, or for additional security use a nylon locknut (not included), to prevent
removal of the device.
Proceed to
Connecting the MK1200 on page
6.
Pole Mount Bracket:
Locking Screw
Shoulder Screws (4)
Connector/Port Cover
Pole Mount Kit
Figure 2-5
Figure 2-3 on page
Figure 2-4 on page
2-5). Cables incorrectly mounted or secured can become pinched when the
2-5.
2-5) and ensure the cables are routed and secured
Figure 2-2 on page
2-7.
2-4) over the shoulder
Wall Mounting Kit on page 2-4
Figure 2-5 on page