Web Kiosk Software Suite; Web Kiosk Software Suite Bar Codes; Installing The Web Kiosk Software Suite - Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual

Web Kiosk Software Suite

The Web Kiosk Software Suite MK1100WEBKSS_X.XX.ZIP and source code are available at
http://devzone.symbol.com. The Web Kiosk Software Suite does not require any external connectivity to run.

Web Kiosk Software Suite Bar Codes

The Web Kiosk Software Suite uses the Web Kiosk Software Suite Bar Codes on page D-1 to demonstrate the
MK1200's capabilities.

Installing the Web Kiosk Software Suite

To install the Web Kiosk Software Suite when the MK1200 is set to launch another application on power-up, see
Accessing the Windows® CE
Accessing the Windows
To prevent launching an application on power-up:
Perform a cold boot: press and hold buttons B and C on the MK1200 (see
1.
display goes blank (typically 15 seconds), then release the buttons.
To prevent the MK1200 from entering an application, simultaneously press and hold buttons A and D just after
2.
the blue
Performing System Initialization (Phase 1)
2. Release the buttons.
When the
3. Enter Password
A and B buttons for Enter. The MK1200 enters Protected Mode and the Windows
Deleting the Current Web Kiosk Software Suite Version
To delete an existing copy of the Web Kiosk Software Suite:
Double-tap the
1.
Double-tap the
2.
Select and delete the
3.
Select and delete the
4.
Select and delete the
5.
NOTE Use Delete in the Files menu to remove the files.
Desktop.
®
CE Desktop
prompt appears, press buttons DDBAC and touch OK, or simultaneously press the
icon on the CE desktop.
My Computer
folder.
Application
MK1100WebKioskSoftwareSuite
file.
mkconfig.reg
Web_KioskSoftwareSuite.reg
Web Kiosk Software Suite
Figure 1-1 on page
screen appears, and before the message changes to Phase
folder.
file.
6 - 3
1-3) until the
®
CE desktop appears.