Rapid Deployment Window - Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual

C - 2 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

Rapid Deployment Window

The
Rapid Deployment
the application. To launch the RD application on the MK1200, tap
Rapid Deployment Window
Figure C-1
Rapid Deployment Window
Table C-1
Text Box/Button
Please scan all of the bar codes...
Bar codes left to scan...
About
Reset
Exit
window displays bar code scan status and provides features for resetting and exiting
This text box displays the status of a scanned bar code.
- indicates the MK1200 is ready to scan a bar code.
Waiting
- indicates the MK1200 successfully scanned a bar code.
OK
If there are no bar codes left to scan, the
Configuring
This text box displays a list of any remaining bar codes to scan (1D bar
codes only). When all required bar codes are scanned successfully, the
Rapid Deployment Configuring
Tap About to display the
Tap Reset to remove any previously scanned data.
Tap Exit to close the application. A confirmation window displays:
Note: Closing the application prior to scanning all required bar codes
discards any scanned data collected up to that point.
Start > Programs > Rapid Deployment Client
Description
window displays (see Figure
window displays (see
Rapid Deployment Client Info
Rapid Deployment
C-3).
Figure C-3).
window.
.