Inactivity Manager - Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual

3 - 22 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
To select a date, tap the date in the calendar.
4.
To set the current time, highlight the hours, minutes, seconds, or AM/PM field in the Current Time field. Tap the
5.
up/down scroll arrows to change the highlighted selection.
To change the time zone, use RDM.
6.
Tap Apply to apply the new date/time settings.
7.
Tap
8. Start > Programs > Save Configuration
file.
NOTE The date resets to June 1, 1999, 12:00 PM upon a cold boot. Use the Control Panel or the SNTP Client to
update this (see
To permanently set the time zone and daylight saving settings, use the RDM or System Menu on the
MK1200.

Inactivity Manager

To set up the inactivity manager:
Tap
1. Start > Settings > Control Panel
Double-tap the
2.
Inactivity Manager Screen
Figure 3-7
Select the application to run during inactivity by tapping the
3.
SimpleSaver.exe.)
Enter the timeout value (in seconds). The default is 0, which allows the system to run continuously without
4.
entering inactivity mode.
Tap OK.
5.
Tap
6. Start > Programs > Save Configuration
Network Time Update: SNTP Client on page
.
icon.
Inactivity Manager
to save the new settings in the MK1200 configuration (mkconfig.reg)
7-10).
button. (The default application is
to save the settings in the MK1200 configuration (mkconfig.reg) file.